Detailed Product Description

Installing the filters

To successfully take photos with filters, you need to get hold on a filter, and adapter ring and a filter holder. With Cokin filters, filter holders come in various sizes depending on the series of your filters.

Adapter rings come in various sizes to perfectly fit your lens. To choose a correct adapter ring for your lens, you need the diameter of your lens. To find out the diameter, check on the front of your lens; there should be a symbol like this one Ø and some numbers (Ø58 for example). You should then purchase and adapter ring that fits lens with Ø58 mm.

To fit an adapter ring on to your lens, you have to screw the ring in, rotating it clockwise until it stops rotating.

To install a filter holder, it usually slots in over the adapter ring (Cokin filter holders). You hold the filter holder backwards and slide it in over the adapter ring.

To install a filter, you need to slide it in through a narrow slot on each side of the filter holder. From there you can adjust where the dark grey part starts and ends by sliding the filter up or down. To take a correct decision, analyse the changes by viewing through your viewfinder.

To remove the filter holder, find the small bump on the back of your filter holder and simply push it forward lightly to release itself from the adapter ring.